Aaron Matthewz
Your Trusted Local Electrician, Chosen by 250+ Happy Customers
Same-Day Service
Licensed & Insured
Upfront & Honest Pricing
Lifetime Labour Guarantee
Your Trusted Local Electrician, Chosen by 250+ Happy Customers
Same-Day Service
Licensed & Insured
Upfront & Honest Pricing
Lifetime Labour Guarantee

Two thirds of Campsie homes are flats: the 2021 Census counted 67.1 per cent apartments, 10.6 per cent semis or townhouses and just 21.7 per cent separate houses. Two-bedroom dwellings dominate at 57.9 per cent. Walk-up blocks fill the streets around the station, while older houses survive in Harcourt, the avenue-named estate laid out from 1889. We handle unit board upgrades, brighter LED lighting, extra outlets for cramped kitchens and full fault finding in those older cottages.

Beamish Street runs 1.6 kilometres and carries shops, restaurants and offices for most of that length, anchored by the Campsie Centre. Canterbury Road adds light industrial units and Canterbury Hospital. We deliver shop fit-outs, restaurant kitchen circuits, workshop power and ongoing maintenance for owners and tenants.

Our same-day service covers Campsie from the Cooks River edge down to Canterbury Road. Urgent jobs we see here include a restaurant losing its kitchen circuit mid-service, a unit block with dead common lighting, and an overheating board in an older walk-up.
Renters and the people who manage their homes make up much of our Campsie work, with 52.8 per cent of dwellings leased at the 2021 Census. Property managers need alarms current before each changeover, unit owners want kitchens and living rooms better lit, and Beamish Street restaurants need reliable power for woks, fridges and exhaust fans. As your Campsie electrician we also look after the grocers, clinics and offices along the main street.
The suburb grew fast after the railway opened in 1895, so a lot of walk-up blocks and cottages carry decades of additions. Fault finding on a shared stairwell circuit, upgrading an old ceramic fuse panel, or handling an urgent electrical fault in a restaurant kitchen are regular requests. We also work across St George and Canterbury-Bankstown and into the neighbouring Inner West suburbs.

Flats account for 67.1 per cent of Campsie dwellings, many in older walk-ups. We upgrade tired unit boards, fix shared lighting and give strata committees clear written reports on faults.
Harcourt, laid out from 1889 with numbered avenues, retains older houses. We test original circuits, replace deteriorated cable and upgrade switchboards so these homes suit modern appliances.
The main street is lined with eateries and retailers. We supply kitchen circuits, refrigeration power, display lighting and exit signs, working outside service hours where possible.
Light industrial and commercial sites line Canterbury Road. We install machine circuits, three-phase outlets within existing supply, high-bay lighting and routine maintenance for small operators.

Our licensed team knows Campsie walk-ups from the inside, including shared meter panels, dated unit boards and the patchwork left by decades of kitchen and bathroom upgrades.

We see the job first, then write down one fixed figure. A two-bedroom unit near Anzac Park and a Beamish Street restaurant kitchen get individual quotes.

When a Beamish Street kitchen loses power at lunch or a unit block stairwell goes dark, we reorder our schedule so an electrician reaches Campsie quickly.

Our 250+ customers include Campsie landlords, strata committees, restaurant owners and families, many sent to us by a neighbour in the same block or a nearby shop.

Whatever we install in a Campsie apartment, cottage or shopfront, including circuits hidden in walls or ceilings, carries our lifetime guarantee on the labour.

Tell us the building entry details, whether there is an intercom, and where we can load in. Beamish Street parking is tight, so we pick a time that suits you and the street.

After testing your installation we explain the findings clearly and email a fixed price. You approve it before we cut in a single new box.

We plan our route around Canterbury Road traffic and show up in the promised window. If a job runs over, we let you know well before you start waiting.

Dust sheets protect floors, every scrap of cable and packaging leaves in our van, and the compliance certificate arrives alongside a brief list of changes you can pass to your agent.

Aaron Matthewz
Andrew Magro
Maha Kassisieh
Jardine Jordan
Madalene P
Kelly M
Bob Sault
Karen Rae
ailsa
Konidis
Local pockets we cover in Campsie
Nearby suburbs we also serve

Our business began in 2017 under Spyro, and today five-plus licensed electricians carry the name into Campsie most weeks. Much of the suburb is apartments, so we have become practised at working politely in shared buildings, reporting clearly to strata and keeping tenants informed. On Beamish Street we plan around trading hours for restaurant and shop owners. The electrician who quotes your job normally completes it too, keeping things simple.
Serving Sydney since
Licensed electricians
Happy customers
Projects completed

Spyro here. Campsie unit tripping again, or a Beamish Street kitchen short of power for the wok line? Dial 02 8999 3691 and I will organise one of our licensed electricians to head over and sort it.
Spyro — Founder, Olympic Electrical
From power points and ceiling fans to full rewires and commercial fit-outs, we handle every job with care and turn up when we say we will. Book your free quote today.
The 2021 Census found 52.8 per cent of Campsie homes rented, well above the NSW figure of 32.6 per cent, and most of those are flats. Keeping alarms legal across these tenancies is work we do more often here than in most suburbs.

Paperwork matters: every Campsie visit closes with a CCEW, the Certificate of Compliance for Electrical Work that NSW law demands. Much of the unit stock here is decades old, so if we disturb old wiring during other work we either correct it or flag it in writing. Touching a switchboard triggers the AS/NZS 3000 rule that its final subcircuits carry RCDs, and ours are Type A or higher, as Type AC left the approved list for new work on 1 May 2023.
Before any tool comes out, Campsie clients hold a single agreed amount on paper. The reason we look first: a new light in a unit with roof access above might take an hour, while adding circuits to a Beamish Street restaurant in an older building involves more planning, working around service times and sometimes a board upgrade.
A tripping unit board near the Campsie Centre, a smoke alarm deadline for your tenants, or a restaurant on Beamish Street that needs more kitchen power? Dial 02 8999 3691; an electrician will look it over in person, commit to a figure on paper and back that labour for as long as you own the place.
Campsie unit owners, landlords, renters and Beamish Street business owners ask us these questions most often. If yours is not covered here, call us on 02 8999 3691.
Frequently, yes. Weekday jobs run between 7am and 5:30pm, Saturdays between 7am and 2pm, and Campsie sits right on our regular loop. An early ring to 02 8999 3691 gives the best odds of a same-day slot. Mention sparking, burning smells or a switch that will not reset, and we will treat it as urgent.
We inspect before pricing. Costs vary with access, building age and the state of the board. A light fitting in a top-floor unit with roof access is quick, while adding kitchen circuits in a Beamish Street shop may involve more work. After seeing it, we give a written fixed price that only changes if you request more work.
Not necessarily, but it is worth testing. Many Campsie walk-ups were built decades ago, and some still have ceramic fuse boards or partial upgrades without RCD protection. We test each circuit, identify weak points, and prioritise what to fix, whether that is a board upgrade, replacing damaged cable or adding safety switches.
Usually it comes down to location. Wiring from your unit board to your rooms is normally yours, while the main switchboard, common lighting and shared meter panels are strata property. With 67.1 per cent of Campsie homes being flats, we trace faults often and provide a written report to both owner and strata manager.
Each level of a leased NSW home must have a smoke alarm that works. A landlord told of a dead or chirping alarm has two business days to repair it, and anything past a decade from its manufacture stamp is due for replacement. Hard-wired types are a job for a licensed electrician only. Campsie property managers lean on us for this and receive dated records afterwards.
Yes. Many Campsie units were built before large induction cooktops and wall ovens were common. We check the circuit rating and board capacity, then connect the appliance safely or run a new dedicated circuit where needed, keeping strata approvals in mind if common areas are affected.
We do. Beamish Street is packed with restaurants, grocers and service businesses, many trading from older buildings with modest supply. We provide commercial electrical work including wok burner igniter circuits, refrigeration, exhaust fans, display lighting and exit signs, timed around trading hours so the dining room keeps turning tables.
Yes. Offices, clinics and tutoring centres along Beamish Street often outgrow the single network point they started with. We run data cabling to desks and consultation rooms, install wall outlets, and label every connection at the rack so a later reshuffle of rooms does not mean opening ceilings again.
Yes. Harcourt, between Campsie and Croydon Park, was laid out from 1889 with numbered avenues and still has older homes. These often need switchboard upgrades, rewiring or extra circuits. We test first, explain the condition clearly and quote the work in stages if that suits your budget.
All of Campsie 2194, from Beamish Street, the Campsie Centre and Anglo Road Mall to Anzac Park, Loch Street Reserve, Mildura Reserve, the Harcourt avenues and Canterbury Road. We also work regularly in Belmore, Canterbury, Ashbury, Croydon Park, Belfield, Hurlstone Park and Burwood Heights.